RISK Titanium Brake Lever Bleed Port Screw, M6 x 0.75 mm Thread and T20 Torx Drive, Compatible with Magura MT2 MT4 MT5 MT7 MT8 Louise Gustav

RISK RT154 Bleed Port Screw

A titanium alloy replacement screw for the brake lever bleed port, with a fitted sealing O-ring. The compact T20 drive and M6 × 0.75 mm thread match the RT154 specification. Choose Rainbow, Gold or Black; each option contains one screw.

Compatibility

Compatible with Magura MT2, MT4, MT5, MT7, MT8, Louise and Gustav brake levers that use the matching M6 × 0.75 mm bleed port and sealing profile. The application photographs show the screw installed at the lever reservoir bleed port. Compare the original port, thread and seal arrangement before selection.

Thread, Drive and Dimensions

Thread: M6 × 0.75 mm (0.75 mm pitch). Tool: T20 Torx driver. Material: titanium alloy. Approximate head diameter: 8 mm; overall height: 7.8 mm; under-head length: 6.8 mm; sealing-tip diameter: 4 mm. Refer to the dimension diagrams for the measurement points.

Weight and Packaging

Approximate net weight: 0.6 g per screw. Approximate packaged weight: 4.7 g. Packaging dimensions: 15 × 9 × 1 cm. Supplied as one piece in a RISK branded bag. Color codes: RT154-1 Rainbow, RT154-2 Gold, RT154-3 Black.

Installation Reference

Use a T20 Torx driver on the RISK RT154 screw. The source specifies a maximum tightening torque of 0.5 N·m; follow the brake manufacturer’s instructions for the actual lever. The video and application photographs show the location and replacement process. Brake levers, tools and fluid shown in demonstrations are separate from the one-screw package.